ComicFrame

How to Store Comic Books: Bags, Boards, Boxes and Pressing

How to store comic books: Mylar vs polypropylene bags, acid-free backing boards, boxes, temperature, humidity and light, plus comic book pressing basics.

Checked October 30, 2026

How to store comic books: the short version

To store comic books safely, put each one in a bag with an acid-free backing board, stand them upright in a comic box, and keep the boxes in a cool, dry, dark room with a stable climate, off the floor and away from attics, basements, radiators and vents. That is what the Library of Congress and museum conservators recommend, and it protects both the paper and the value.

Comics need the care because of what they are made of. Most were printed on wood pulp paper, which is chemically unstable and often acidic, and it can yellow and turn brittle over time. Condition is a large part of a comic's value, so storage is worth getting right.

Comic book bags: Mylar vs polypropylene

Conservators accept three plastics for storing paper: polypropylene, polyester and polyethylene. Avoid PVC, which can discolor what it touches. Comic bags come in sizes for different eras, usually labeled Current or Modern, Silver or Regular, and Golden, so match the bag to the book.

Never tape the bag shut onto the comic, and avoid sealing sleeves with double-sided tape: adhesives can creep over time and damage what they hold.

Polypropylene bags
The standard, inexpensive comic bag. Archival safe, but gas permeable. Their low cost makes them popular for large collections.
Mylar (polyester) sleeves
Clear, stiff and chemically inert, with no plasticizers. Polyester is almost impermeable to gases and does not yellow with age, and the Library of Congress recommends polyester sleeves stiff enough to support the comic. They cost more than polypropylene bags and are sold in thicknesses such as 2 mil and 4 mil.
One caution with polyester
Polyester builds up static, which can lift crumbs of paper from brittle pages. Handle very old, fragile books gently when sliding them in and out.

Acid-free backing boards

A backing board keeps the comic flat and stiff inside the bag. Choose boards labeled acid-free and buffered: buffering with calcium carbonate neutralizes acid that migrates out of the comic's paper. Conservation guidance also favors lignin-free board, since lignin is one of the components that turn paper acidic.

Because a buffered board absorbs acid over the years, BCW, a large supplier of comic storage, suggests replacing boards every three to five years. Pick boards the same size as your bags.

Comic boxes and where to keep them

Comic boxes are sized for bagged and boarded books. A standard short box holds about 150 to 175 comics and a long box about 250 to 300. Fill them so the comics stand upright, keep the lids on against dust and light, and never set the boxes directly on the floor.

Cheap wood pulp cardboard is not an archival material, so treat ordinary boxes as a dust and light shield and rely on the bags and boards to protect each comic. If a damp space is your only option, conservators at The Henry Ford suggest watertight polyethylene or polypropylene boxes with silica gel packets, replaced from time to time.

Temperature, humidity and light

The Library of Congress recommends a cool, relatively dry, clean and stable environment for comic books: room temperature or below and about 35% relative humidity. Keep conditions steady, too. Attics, basements and other places with temperature swings, damp or a risk of leaks are the spots to avoid.

Light damages paper and ink, so keep exposure to a minimum and never put comics in direct or intense light. Do not display them near windows. For a lit display case, The Henry Ford's conservators recommend LED lights on a timer, which give off little ultraviolet light and heat, and they note that Mylar covers appear to block some of light's damaging effects.

Handling and display

Handle comics with clean hands on a clean surface, away from food and drink. Do not open a comic more than flat, and never fold it back on itself. Skip paper clips, folded page corners and acidic bookmarks, and never use rubber bands, self-adhesive tape or glue.

To frame a comic, keep it in a Mylar sleeve so it cannot touch the glass, where high humidity could make it stick. A torn comic should not be mended with ordinary tape; for anything valuable, ask a book or paper conservator. The American Institute for Conservation keeps a directory of conservators.

Comic book pressing

Comic book pressing removes defects that do not break the color on the cover: dents, bends, crunches, rippling, warping, spine rolls and indentations. It only addresses defects of that kind, so it will not remove a tear or a color break. CGC offers pressing as a service before grading, since flattening these defects improves how a book looks and can help it reach a higher grade.

CGC does not consider pressing to be restoration, because it neither adds nor removes material. Dry cleaning and tape removal are also non-restorative, while cleaning with water or solvents counts as restoration. CGC says that done correctly, multiple pressings do not hurt a comic. The words done correctly matter: for a valuable book, use a professional service.

On October 30, 2026, CGC's own pressing service cost $12 per modern comic worth up to $400 (or $10 in bulk lots of 25), $30 for a comic from before 1975, $70 for books worth up to $1,000 and 4% of value (minimum $100) above that. For the standard tiers it added about 45 working days on top of the grading time. Pressing pays off only when the higher grade is worth more than the fee; the ComicFrame app shows what an issue is worth at each CGC grade, so you can compare before you decide.

Sources

Know the exact value of your copy

Point your phone at the cover. ComicFrame finds the issue and edition in a second and shows its value for every grade, raw and CGC, so you can see what your copy is really worth.

Scan your comics free